Makita 2-SPEED HAMMER 8401 Instruction Manual download pdf (Page 4)

VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,

outlet, etc.) be sure the voltage supplied is the same as that specified on

the

nameplate of the tool. A power source with voltage greater than that specified

for the tool can result in SERIOUS INJURY to the user

as well as damage to

the tool.

in doubt,

NOT PLUG

THE TOOL. Using a power source with

voltage less than the nameplate rating is harmful to the motor.

ADDITIONAL SAFETY RULES

Wear a hard hat (safety helmet), safety glasses and/or face shield.

is also

highly recommended that you wear a dust mask, ear protectors and thickly

padded gloves.

Under normal operation, the tool is designed to produce vibration. The screws

can come loose easily, causing a breakdown or accident. Check tightness of

screws carefully before operation.

Always be sure you have a firm footing.

Be sure no one is below when using the tool in high locations.

Hold the tool firmly with both hands. Always use the side grip.

Keep hands away from rotating parts.

not leave the tool running. Operate the tool only when hand-held.

When drilling into walls, floors or wherever "live" electrical wires may be

encountered,

NOT TOUCH ANY METAL PARTS

THE TOOL!

Hold the tool by the insulated grasping surfaces to prevent electric shock if

you drill into a "live" wire.

not touch the bit or the workpiece immediately after operation; they may

be extremely hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Makita 2-SPEED HAMMER 8401 Instruction Manual Page 4