Makita 9404 Datasheet download pdf (Page 9)

When the dust bag is about half full, remove the dust bag

from the tool and pull the fastener out. Empty the dust bag of

its contents, tapping it lightly so as to remove particles adher-

ing to the insides which might hamper further collection.

NOTE:

• If you connect a Makita vacuum cleaner to this tool,

more efficient and cleaner operations can be performed.

OPERATION

Sanding operation

CAUTION:

• The tool should not be in contact with the workpiece

surface when you turn the tool on or off. Otherwise a

poor sanding finish or damage of the belt may result.

Hold the tool firmly with both hands. Turn the tool on and wait

until it attains full speed. Then gently place the tool on the

workpiece surface. Keep the belt flush with the workpiece at

all times and move the tool back and forth.

Never force the tool. The weight of the tool applies adequate

pressure. Excessive pressure may cause stalling, overheat-

ing of the motor, burning of the workpiece and possible kick-

back.

Sanding shoe (optional accessory)

The sanding shoe readily allows you to sand workpieces

more evenly.

1. Dust bag

2. Fastener

003389

003391

1. Sanding shoe

003394

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Makita 9404 Datasheet Page 9