Makita XPK01 Use and Care Manual download pdf (Page 7)

002566

6. Set the drum cover over the adjusting plate/set

plate and screw in the three hex flange head bolts

so that a gap exists between the drum and the set

plate to slide the mini planer blade into position.

The blade will be positioned by the planer blade

locating lugs on the set plate.

7. The blade's lengthwise adjustment will need to be

manually positioned so that the blade ends are

clear and equidistant from the housing on one

side and the metal bracket on the other.

8. Tighten the three hex flange head bolts (with the

socket wrench provided) and hand rotate the

drum to check clearances between the blade

ends and the tool body.

9. Check the three hex flange head bolts for final

tightness.

10. Repeat procedures 1 - 9 for other blade.

Installing conventional planer blade

(optional accessory)

To install the blades, first clean out all chips or foreign

matter adhering to the drum or blades. Use blades of the

same dimensions and weight, or drum

oscillation/vibration will result, causing poor planing

action and, eventually, tool breakdown.

002555

Place the blade on the gauge base so that the blade

edge is perfectly flush with the inside edge of the gauge

plate. Place the adjusting plate on the blade, then simply

press in the heel of the adjusting plate flush with the

back side of the gauge base and tighten two screws on

the adjusting plate. Now slip the heel of the adjusting

plate into the drum groove, then fit the drum cover on it.

Tighten all the installation bolts evenly and alternately

with the socket wrench.

Repeat the above procedures for the other blade.

002556

1. Inside edge of

gauge plate

2. Blade edge

3. Planer blade

4. Adjusting plate

5. Screws

6. Heel

7. Back side of

gauge base

8. Gauge plate

9. Gauge base

1. Bolts

2. Drum

3. Planer blade

4. Drum cover

5. Adjusting plate

1. Mini planer

blade

2. Groove

3. Set plate

4. Hex. flange

head bolts

5. Drum cover

6. Drum

7. Adjusting plate

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Comments to this Manuals

No comments

Makita XPK01 Use and Care Manual Page 7

Comments to this Manuals