Makita KP0810 User Manual download pdf (Page 7)

12. Always switch off and wait for the blades to

come to a complete stop before any adjusting.

13. Never stick your finger into the chip chute.

Chute may jam when cutting damp wood.

Clean out chips with a stick.

14. Do not leave the tool running. Operate the tool

only when hand-held.

15. Always change both blades or covers on the

drum, otherwise the resulting imbalance will

cause vibration and shorten tool life.

16. Use only Makita blades specified in this

manual.

17. Always use the correct dust mask/respirator

for the material and application you are

working with.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product.

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on

the tool.

Adjusting depth of cut

Fig.1

Depth of cut may be adjusted by simply turning the knob

on the front of the tool so that the pointer points the

desired depth of cut.

Switch action

CAUTION:

• Before plugging in the tool, always check to see

that the switch trigger actuates properly and

returns to the "OFF" position when released.

Fig.2

For tool with lock button

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For continuous operation, pull the switch trigger and

then push in the lock button from either side.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

For tool with lock-off button

To prevent the switch trigger from being accidentally

pulled, a lock-off button is provided.

To start the tool, depress the lock-off button from either

side and pull the switch trigger. Release the switch

trigger to stop.

Electronic function

For Model KP0810C only

The tool equipped with electronic function are easy to

operate because of the following features.

Constant speed control

Electronic speed control for obtaining constant speed.

Possible to get fine finish, because the rotating speed is

kept constant even under load condition.

Soft start

Soft-start feature minimizes start-up shock, and makes

the tool start smoothly.

Foot

Fig.3

After a cutting operation, raise the back side of the tool

and a foot comes under the level of the rear base. This

prevents the tool blades to be damaged.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the

tool.

Removing or installing planer blades

CAUTION:

• Tighten the blade installation bolts carefully when

attaching the blades to the tool. A loose installation

bolt can be dangerous. Always check to see they

are tightened securely.

• Handle the blades very carefully. Use gloves or

rags to protect your fingers or hands when

removing or installing the blades.

• Use only the Makita wrench provided to remove or

install the blades. Failure to do so may result in

overtightening or insufficient tightening of the

installation bolts. This could cause an injury.

For tool with standard planer blades

Fig.4

Fig.5

Fig.6

To remove the blades on the drum, unscrew the

installation bolts with the socket wrench. The drum cover

comes off together with the blades.

To install the blades, first clean out all chips or foreign

matter adhering to the drum or blades. Use blades of the

same dimensions and weight, or drum

oscillation/vibration will result, causing poor planing

action and, eventually, tool breakdown.

Place the blade on the gauge base so that the blade

edge is perfectly flush with the inside edge of the gauge

plate. Place the adjusting plate on the blade, then simply

press in the heel of the adjusting plate flush with the

back side of the gauge base and tighten two screws on

the adjusting plate. Now slip the heel of the adjusting

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Comments to this Manuals

No comments

Makita KP0810 User Manual Page 7

Comments to this Manuals

Related products and manuals for Power planers Makita KP0810