Makita 1923H Instruction Manual

1 ENGLISH (Original instructions) INSTRUCTION MANUAL DOUBLE INSULATION IMPORTANT: Read Before Using. Power Planer1923H 010674

10 Replacing carbon brushes 1 001145 Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark. Keep the carbon br

11

12 Makita Corporationwww.makita.com 883522J3

2 ENGLISH (Original instructions) SPECIFICATIONS Model 1923H Planing width 82 mm Planing depth 3.5 mm Shiplapping depth 23 mm No load speed (min-1)

3 9. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the ris

4 7. Be sure the blade installation bolts are securely tightened before operation. 8. Hold the tool firmly with both hands. 9. Keep hands away from

5 To stop the tool from the locked position, pull the switch trigger fully, then release it. For tool with lock-off button To prevent the switch trigg

6 12345678910 002565 2. To install the blades, loosely attach the adjusting plate to the set plate with the pan head screws and set the mini planer

7 For the correct planer blade setting Your planing surface will end up rough and uneven, unless the blade is set properly and securely. The blade mus

8 For other countries and areas A nozzle and joint (optional accessories) are necessary to connect a Makita vacuum cleaner to your tool. Consult a Mak

9 002584 010709 CAUTION: • The blade edge should be made to protrude outside slightly (0.3 mm - 0.6 mm). Otherwise, nicks and generally poor ship