Cordless Power Planer DZ DWA DWD DWF MODEL 1051 D - - Ni-Cd 2.0Ah Ni-MH 2.6 Ah Ni-MH 3.0 Ah INSTRUCTION MANUAL 4 Extra DWAE I DWDE / DWFE ...+
CAUTION: *The high capacity battery charger Model DC1411 is for charging Makita battery cartridge. Never use it for other purposes or for other manufa
Adjusting depth of cut The depth of cut can be adjusted in 0.1 mm increments within a range of 0 - 0.5 mm (0.02"). Turn the knob on the front of
Edge fence (Guide rule) Use the edge fence when shiplapping (rab- beting) or cutting workpieces nearly 50 mm (1-31/32") wide. Install the edge f
Shiplapping (Rabbeting) To make a stepped cut as shown in Fig., use the edge fence (guide rule). Draw a cutting line on the workpiece. Align the bla
ASSEMBLY Dust bag Install the dust bag on the nozzle of the tool. When installing it, push the bag's entry port toward the nozzle as far as it wi
To install the blades, first clean out all chips I or foreign matter adhering to the drum or blades. Insert the blade between the drum cover from the
OPERATION Planing operation First, rest the tool front base flat upon the workpiece surface without the blades making any contact. Switch on and wa
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other ac
WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known [to the State of
Planing width Planing depth depth 50 mm 0.5 mm 15 mm (131B2") (0.02") (9/16") Battery Cartridge Voltage Battery Charger 1422 1
GENERAL SAFETY RULES (For All Battery Operated Tools) WARNING! Read and understand all instructions. Failure to follow all instructions listed below,
Tool Use and Care 12. Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against
Specific Safety Rules US604 1 - 1 1. Be aware that this tool is always in an operating condition, because it does 2. Rags, cloth, cord, string and
SYMBOLS The followings show the symbols used for tool. v ... volts - __-- direct current ...
us1001.1 Length of Cord (Feet) 25 AWG Size of Cord 18 IMPORTANT SAFETY INSTRUCTIONS 50 100 150 18 18 16 FOR CHARGER & BATTERY CARTRIDGE I. S
USCOOl 1 ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) 2. Do
FUNCTIONAL DESCRIPTION Installing or removing battery cartridge *Always switch off the tool before inser- tion or removal of the battery cartridge.
Comments to this Manuals