Makita UH5580 Instruction Manual download pdf (Page 9)

Removing the shear blades

Reverse the tool and loosen four screws.

009295

NOTE:

• Be careful not to get your hands dirty as grease is

applied in the shear blade driving area.

Remove the under cover.

009296

Remove the gear housing cover.

009297

Set the crank at the angle as shown in the figure with a

slotted bit screwdriver.

009298

Remove two screws from the shear blades and the

shear blade unit will be taken out.

009299

CAUTION:

• Return the gear to the original position in such a

manner as it was installed if it should be taken

away by mistake.

Installing the shear blade

Prepare 4 removed screws (For under cover), 2 screws

(For shear blade), gear housing cover, under cover, and

new shear blades.

Adjust the crank position as shown in the figure. At this

time, apply some grease provided with new shear

blades to the periphery of the crank.

009300

Overlap the oval hole in the upper blade with that in the

lower one.

009301

Take ou t t he bla de c ove r f ro m t he ol d sh ea r b la de s a nd

fit it onto the new ones for easy handling during the

replacement of blades.

1. Ellipse of shear

blade

1. Crank

1. Screws

2. Shear blade

1. Crank

1. Gear housing

cover

1. Under cover

2. Blade cover

1. Screws

2. Blade cover

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Makita UH5580 Instruction Manual Page 9

Comments to this Manuals

Related products and manuals for Power hedge trimmers Makita UH5580