Makita MODEL 6019D User Manual download pdf (Page 7)

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before adjusting or

checking function on the tool.

Installing or removing battery cartridge

• Always switch off the tool before insertion or removal of

the battery cartridge.

• To remove the battery cartridge, pull out the set plate on

the tool and grasp both sides of the cartridge while

withdrawing it from the tool.

• To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Snap the set plate back into place. Be sure

to close the set plate fully before using the tool to prevent

the battery cartridge from accidentally falling out of the

tool.

• Do not use force when inserting the battery cartridge. If

the cartridge does not slide in easily, it is not being

inserted correctly.

Charging

1. Plug the battery charger into the proper AC voltage

source.

2. Insert the battery cartridge so that the plus and minus

terminals on the battery cartridge are on the same sides

as their respective markings on the charger. Insert the

cartridge fully into the port so that it rests on the charger

port floor.

3. When the battery cartridge is inserted, the charging light

color will flash in red color and charging will begin.

4. When the charging light goes out after about one hour,

you may remove the fully charged battery cartridge.

5. After charging, unplug the charger from the power

source.

NOTE:

• The battery charger is for charging Makita battery

cartridge. Never use it for other purposes or for other

manufacturer’s batteries.

1. Set plate

2. Battery cartridge

002045

1. Charging light

002862

1 2 3 4 5 6 7 8 ... 20

Comments to this Manuals

No comments

Makita MODEL 6019D User Manual Page 7

Comments to this Manuals

Related products and manuals for Power drills Makita MODEL 6019D