Makita LS1040F Instruction Manual download pdf (Page 9)

For all countries other than European countries

003825

To pr even t t h e s wi tc h t ri g ger f ro m b ein g a c cid ent a lly

pulled, a lock-off button is provided.

To s ta rt t h e too l, de p re s s th e l ock -off bu tto n a nd p u ll th e

switch trigger. Release the switch trigger to stop.

WARNING:

• NEVER use tool without a fully operative switch

trigger. Any tool with an inoperative switch is

HIGHLY DANGEROUS and must be repaired

before further usage.

• For your safety, this tool is equipped with a lock-off

button which prevents the tool from unintended

starting. NEVER use the tool if it runs when you

simply pull the switch trigger without pressing the

lock-off button. Return tool to a Makita service

center for proper repairs BEFORE further usage.

• NEVER tape down or defeat purpose and function

of lock-off button.

Lighting up the lamps

003826

CAUTION:

• This is not a rainproof light. Do not wash the light in

water or use it in a rain or a wet area. Such a

conduct can cause an electric shock and fume.

• Do not touch the lens of the light, as it is very hot

while it is lighted or shortly after it is turned off. This

may cause a burn to a human body.

• Do not apply impact to the light, which may cause

damage or shorted service time to it.

• Do not keep casting the beam of the light to your

eyes. This can cause your eyes to be hurt.

• Do not cover the light with clothes, carton,

cardboard or similar objects while it is lighted,

which can cause a fire or an ignition.

Push the upper position of the switch for turning on the

light and the lower position for off.

Move the light to shift an area of lighting.

003827

NOTE:

• Use a dry cloth to wipe the dirt off the lens of lamp.

Be careful not to scratch the lens of light, or it may

lower the illumination.

ASSEMBLY

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before carrying out any work on the

tool.

Installing or removing saw blade

CAUTION:

• Always be sure that the tool is switched off and

unplugged before installing or removing the blade.

• Use only the Makita socket wrench provided to

install or remove the blade. Failure to do so may

result in overtightening or insufficient tightening of

the hex bolt. This could cause a personal injury.

To r emo ve t he b l ade , u se t h e s ock et wr enc h t o l oos en

the hex bolt holding the center cover by turning it

counterclockwise. Raise the blade guard and center

cover.

001858

Press the shaft lock to lock the spindle and use the

socket wrench to loosen the hex bolt clockwise. Then

remove the hex bolt, outer flange and blade.

1. Center cover

2. Socket wrench

3. Hex bolt

4. Blade guard

1. Light

2. Light switch

1. Light switch

1. Lock-off button

2. Switch trigger

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments

Makita LS1040F Instruction Manual Page 9

Comments to this Manuals

Related products and manuals for Mitre saws Makita LS1040F