Makita LS1040F Instruction Manual download pdf (Page 6)

43. Take care when slotting.

44. Some dust created from operation contains

chemicals known to cause cancer, birth

defects or other reproductive harm. Some

examples of these chemicals are:

• lead from lead-based-painted material and,

• arsenic and chromium from

chemically-treated lumber.

Your risk from these exposures varies,

depending on how often you do this type of

work. To reduce your exposure to these

chemicals: work in a well ventilated area and

work with approved safety equipment, such as

those dust masks that are specially designed

to filter out microscopic particles.

45. To reduce the emitted noise, always be sure

that the blade is sharp and clean.

46. The operator is adequately trained in the use,

adjustment and operation of the machine.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to safety

rules for the subject product. MISUSE or failure to

follow the safety rules stated in this instruction

manual may cause serious personal injury.

INSTALLATION

Installing auxiliary plate

012658

001832

Installing the auxiliary plate using the notch in the tool's

base and secure it by tightening the hex bolt.

Installing the holders

012653

012652

Install the holders on both sides of the base and secure

them with screws.

Adjust the adjusters so that they contact the floor surface.

NOTE:

In some countries, the holders may not have feet.

Bench mounting

When the tool is shipped, the handle is locked in the lowered

position by the stopper pin. Release the stopper pin by

lowering the handle slightly and pulling the stopper pin.

001792

This tool should be bolted with two bolts to a level and stable

surface using the bolt holes provided in the tool's base. This

will help prevent tipping and possible personal injury.

001856

1. Bolt

1. Stopper pin

1. Holder

2. Adjuster

3. Screw

1. Holder

1. Auxiliary plate

2. Base

3. Hex bolt

4. Nut

1. Auxiliary plate

2. Hex bolt

3. Base

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments

Makita LS1040F Instruction Manual Page 6

Comments to this Manuals

Related products and manuals for Mitre saws Makita LS1040F