Makita LS1013F User Manual download pdf (Page 15)

be destroyed. PERSONAL INJURY MAY ALSO

RESULT. Also, after a cutting operation, DO NOT raise

the blade until the blade has come to a complete stop.

CAUTION:

• When cutting long workpieces, use supports that are as

high as the top surface level of the turn base. Do not rely

solely on the vertical vise and/or horizontal vise to

secure the workpiece.

Thin material tends to sag. Support workpiece over its

entire length to avoid blade pinch and possible

KICKBACK.

Sub-fence

This tool is equipped with the sub-fence. It should be posi-

tioned as shown in the figure.

CAUTION:

• When performing left bevel cuts, flip the fence over to the

left position as shown in the figure. Otherwise, it will

contact the blade or a part of the tool, causing possible

serious injury to the operator.

Sub-fence R (optional accessory)

The sub-fence R can be installed on the right side of the

guide fence. Insert the rods of the sub-fence R into the holes

in the guide fence. Tighten the screws which come with the

sub-fence R to secure the sub-fence R.

CAUTION:

• When performing right bevel cuts, never use the sub-

fence R. It will contact the blade or a part of the tool,

causing possible serious injury to the operator.

1. Support

2. Turn base

1 2

001549

1. Sub-fence

001545

1. Sub-fence

001546

1. Sub-fence R

2. Screws

001547

1 ... 14 15 16 ... 36

No comments

Makita LS1013F User Manual Page 15