Makita XPH06Z Use and Care Manual download pdf (Page 8)

3.5 x 22

3.5 x 22 4.1x 38

4.1x 38

12 4 6 8 10 12 14 16

M4 M5 M6

Guideline of fastening torque

Adjusting graduations

Machine screw

Wood screw

Soft wood

(e.g. pine)

Hard wood

(e.g. lauan)

013981

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out

any work on the tool.

Installing or removing the driver bit or drill bit

013967

Turn the sleeve counterclockwise to open the chuck

jaws. Place the bit in the chuck as far as it will go. Turn

the sleeve clockwise to tighten the chuck.

To remove the bit, turn the sleeve counterclockwise.

Installing the hook

014005

The hook is convenient for temporarily hanging the tool.

This can be installed on either side of the tool.

To install the hook, insert it into a groove in the tool

housing on either side and then secure it with a screw.

To remove, loosen the screw and then take it out.

Installing the bit holder (Optional accessory)

013966

Fit the bit holder into the protrusion at the tool foot on

either right or left side and secure it with a screw.

When not using the driver bit, keep it in the bit holders.

Bits 45 mm-long (1-3/4") can be kept there.

OPERATION

CAUTION:

• Always insert the battery cartridge all the way until

it locks in place. If you can see the red part on the

upper side of the button, it is not locked completely.

Insert it fully until the red part cannot be seen. If

not, it may accidentally fall out of the tool, causing

injury to you or someone around you.

• When the speed comes down extremely, reduce

the load or stop the tool to avoid the tool damage.

013972

Hold the tool firmly with one hand on the grip and the

other hand on the bottom of the battery cartridge to

control the twisting action.

1. Bit holder

2. Bit

1. Groove

2. Hook

3. Screw

1. Sleeve

1 2 3 4 5 6 7 8 9 ... 32

Comments to this Manuals

No comments

Makita XPH06Z Use and Care Manual Page 8

Comments to this Manuals

Related products and manuals for Cordless combi drills Makita XPH06Z