Makita MAC2400 User Manual download pdf (Page 17)

TROUBLESHOOTING GUIDE

17

OWNERS MANUAL

MAKITA - MAC700 / MAC2400 / MAC5200

PROBLEM CAUSE CORRECTION

Motor will not run. (con’t)

Regulator knob has continuous

air leak. Regulator will not shut

off at air outlet.

Check valve is stuck open.

Loose electrical connections.

Possible defective capacitor.

Paint spray on internal motor

parts.

Possible defective motor.

Fuse Blown, circuit breaker

tripped.

Pressure unloader valve on

pressure switch has not

unloaded head pressure.

Dirty or damaged regulator

internal parts.

Remove and clean, or replace.

Check wiring connection inside

pressure switch and terminal

box area.

Return to an Authorized

Warranty Service Center for

inspection or replacement if

necessary.

Have checked at an

Authorized Warranty Service

Center. Do not operate the

compressor in the paint spray

area. See flammable vapor

warning.

Have checked at an

Authorized Warranty Service

Center.

Check fuse box for blown fuse

and replace. If necessary,

reset circuit breaker. Do not

use a fuse or circuit breaker

with higher rating than

specified for your particular

branch circuit.

Check for low voltage

conditions and/or proper

extension cord.

Disconnect the other electrical

appliances from circuit or

operate the compressor on its

own branch circuit.

Bleed the line by pushing the

lever on the pressure switch to

the "off" position; if the valve

does not open, replace it.

Replace regulator.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments