8
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
Blade diameter..................................................................................................................................................290 - 305 mm
Hole diameter ...........................................................................................................................................................25.4 mm
Max. Cutting capacities (H x W)
(Note)
* mark indicates that a wood facing with the following thickness is used.
No load speed (min
-1
)....................................................................................................................................................3,200
Dimensions (L x W x H) ........................................................................................................... 800 mm x 590 mm x 690 mm
Net weight ...................................................................................................................................................................22.0 kg
•Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
•Specifications may differ from country to country.
1. Stopper pin
2. Bolts
3. Blade guard
4. Kerf board
5. Knob
6. Saw blade
7. Blade teeth
8. Left bevel cut
9. Straight cut
10. Right bevel cut
11. Adjusting bolt
12. Turn Base
13. Top surface of turn base
14. Periphery of blade
15. Guide fence
16. Adjusting screw
17. Stopper arm
18. Miter scale
19. Pointer
20. Lock pin
21. Grip
22. Lever
23. Arm
24. Bevel scale
25. Lock-off button
26. Handle
27. Switch trigger
28. Wrench holder
29. Socket wrench
30. Center cover
31. Hex bolt
32. Blade case
33. Arrow
34. Shaft lock
35. Inner flange
36. Spindle
37. Ring
38. Outer flange
39. Hex bolt (left handed)
40. Dust nozzle
41. Dust bag
42. Fastener
43. Sub-fence
44. Sub-fence R
45. Screws
46. Clamp screw
47. Vise rod
48. Vise arm
49. Holder assembly
50. Screw
51. Vise plate
52. Base
53. Vise nut
54. Vise knob
55. Holder
56. Rod 12
57. Vise
58. Spacer block
59. Aluminum extrusion
60. Spacer blocks
61. Horizontal vise
62. Hole
63. Over 17mm
64. Over 580mm
65. Set plate
66. Cut grooves with blade
67. Hex bolts
68. Triangular rule
69. Pointers
70. Arm holder
71. Right 45° bevel angle adjusting bolt
72. Left 45° bevel angle adjusting bolt
73. Limit mark
74. Brush holder cap
75. Screwdriver
Miter angle
Bevel angle
45° (left) 0° 45° (right)
0°
* 69 mm x 230 mm
61 mm x 298 mm
55 mm x 310 mm
* 120 mm x 230 mm
107 mm x 298 mm
98 mm x 310 mm
* 49 mm x 230 mm
40 mm x 298 mm
35 mm x 310 mm
45° (left and right)
* 69 mm x 162 mm
61 mm x 211 mm
55 mm x 220 mm
* 120 mm x 162 mm
107 mm x 211 mm
98 mm x 220 mm
* 49 mm x 162 mm
40 mm x 211 mm
35 mm x 220 mm
60° (right) –
* 120 mm x 115 mm
107 mm x 149 mm
98 mm x 155 mm
–
Miter angle Thickness of wood
0° 34 mm
45° (left and right) 24 mm
60° (right) 17 mm
Comments to this Manuals