Makita LH1040F User Manual download pdf (Page 7)

Repair

P 7 / 20

< 5 > Removing blade case section

11. Put the removed blade case section on the turn base of arbor press, And set 1R306 "Ring Spring Removing Jig"

between the two screwdrivers, inserted in the step of Fig.3-7. See Fig.3-9.

12. Press down 1R306 "Ring Spring Removing Jig" with arbor press. So, spring holder is pressed down and

the screwdrivers can be pulled out from blade case.

13. Put the removed blade case section on the turn base of arbor press, And set 1R306 "Ring Spring Removing Jig"

between the two screwdrivers, inserted in the step of Fig.3-7. See Fig.3-9.

14. Press down 1R306 "Ring Spring Removing Jig" with arbor press in order to lower spring holder,

while holding the blade case section firmly, so that it does not tilt or wobble.

15. Slowly lessen the pressure to 1R306 "Ring Spring Removing Jig", while holding the blade case section

firmly, so that it does not tilt or wobble. See Fig.3-10.

16. Remove spring holder and compression spring 27 from blade case, when the jig gets free from the force

of compression spring. See Fig.3-10.

Blade case section

Screwdriver

Arbor press

No.1R306

Ring Spring Removing Jig

Fig.3-9

Spring holder

Compression spring 27

Fig.3-10

Slowly lessen the

pressure to the jig.

No.1R306

Ring Spring

Removing Jig

1 2 3 4 5 6 7 8 ... 20

No comments

Makita LH1040F User Manual Page 7