Makita 9526PBH Specifications download pdf (Page 7)

Installing side grip (handle)

CAUTION:

• Always be sure that the side grip is installed securely

before operation.

Screw the side grip securely on the position of the tool as

shown in the figure.

Installing or removing wheel guard

CAUTION:

• When using a depressed center grinding wheel/Multi-

disc, flex wheel, wire wheel brush or cut-off wheel, the

wheel guard must be fitted on the tool so that the closed

side of the guard always points toward the operator.

Mount the wheel guard with the protrusion on the wheel

guard band aligned with the notch on the bearing box. Then

rotate the wheel guard around 180 degrees. Be sure to

tighten the screw securely.

To remove wheel guard, follow the installation procedure in

reverse.

Installing or removing depressed center grinding

wheel/Multi-disc

WARNING:

• Always use supplied guard when depressed center

grinding wheel/Multi-disc is on tool. Wheel can shatter

during use and guard helps to reduce chances of

personal injury.

Mount the inner flange onto the spindle. Fit the wheel/disc on

the inner flange and screw the lock nut onto the spindle.

001051

1. Wheel guard

2. Bearing box

3. Screw

1. Wheel guard

2. Bearing box

3. Screw

001656

9526PBH

001657

9527PB, 9528PB

1. Lock nut

2. Depressed center grinding wheel/

Multi-disc

3. Inner flange

001070

1 2 3 4 5 6 7 8 ... 16

Comments to this Manuals

No comments

Makita 9526PBH Specifications Page 7

Comments to this Manuals

Related products and manuals for Angle grinders Makita 9526PBH