Makita 9526PBH Specifications

INSTRUCTION MANUALWARNING:For your personal safety, READ and UNDERSTAND before using.SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.Angle Grinder100 mm

10Operation with wire wheel brush (optional accessory)CAUTION:• Check operation of wire wheel brush by running tool withno load, insuring that no one

11MAINTENANCECAUTION:• Always be sure that the tool is switched off andunplugged before attempting to perform inspection ormaintenance.The tool and it

12from your Makita distributor or factory service center, besure to obtain and use all necessary fasteners andguards as recommended in this manual. Yo

Memo13

Memo14

Memo15

Warranty PolicyEvery Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects fromworkmanship

2SPECIFICATIONS• Manufacturer reserves the right to change specifications without notice.• Specifications may differ from country to country.GENERAL S

35. Avoid body contact with grounded sur-faces such as pipes, radiators, ranges andrefrigerators. There is an increased risk ofelectric shock if your

424. When servicing a tool, use only identicalreplacement parts. Follow instructions inthe Maintenance section of this manual.Use of unauthorized part

58. Be careful not to damage the spindle, theflange (especially the installing surface)or the lock nut. Damage to these partscould result in wheel bre

6FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function on thetool.Shaft lock

7Installing side grip (handle)CAUTION:• Always be sure that the side grip is installed securelybefore operation.Screw the side grip securely on the po

8To tighten the lock nut, press the shaft lock firmly so that thespindle cannot revolve, then use the lock nut wrench andsecurely tighten clockwise.To

9• NEVER bang or hit grinding disc or wheel onto work.• Avoid bouncing and snagging the wheel, especiallywhen working corners, sharp edges etc. This c