Makita 9067DB User Manual download pdf (Page 9)

To tighten the lock nut, press the shaft lock firmly so that the

spindle cannot revolve, then use the lock nut wrench and

securely tighten clockwise.

To remove the wheel, follow the installation procedure in

reverse.

Installing or removing flex wheel

(optional accessory)

WARNING:

• Always use supplied guard when flex wheel is on tool.

Wheel can shatter during use and guard helps to reduce

chances of personal injury.

Follow instructions for depressed center grinding wheel/

Multi-disc but also use plastic pad over wheel. See order of

assembly on accessories page in this manual.

Installing or removing abrasive disc

(optional accessory)

NOTE:

• Use sander accessories specified in this manual. These

must be purchased separately.

Mount the rubber pad onto the spindle. Fit the disc on the

rubber pad and screw the lock nut onto the spindle. To

tighten the lock nut, press the shaft lock firmly so that the

spindle cannot revolve, then use the lock nut wrench and

securely tighten clockwise.

To remove the disc, follow the installation procedure in

reverse.

1. Lock nut wrench

2. Shaft lock

001089

1. Lock nut

2. Flex wheel

3. Plastic pad

4. Inner flange

001101

1. Lock nut

2. Abrasive disc

3. Rubber pad

001112

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Makita 9067DB User Manual Page 9