Makita MAC5501G Use and Care Manual download pdf (Page 14)

3) Replace air filter (more often if comp-

EXTRA CARE SHOULD BE TAKEN TO ressor is used near paint spraying

AVOID PERSONAL INJURIES WITH operations or in dusty environments).

AUTOMATICALLY CONTROLLED

COMPRESSORS

DAILY OR BEFORE EACH USE

1) Check oil level

2) Drain condensation from air receiver

3) Check for any unusual noise or

vibration

4) Be sure all nuts and bolts are tight

WEEKLY

1) Turn off engine. Clean dust and foreign

matter from cylinder head, engine, fan

blades, intercooler, and air receiver.

2) Clean air filter by opening air filter,

removing filter element and cleaning it

thoroughly and allow to dry completely

before assembly.

3) Worn filter should be replaced.

4) Check v-belts for wear.

MONTHLY

1) Inspect unit for leaks.

2) Tighten joints if leaks are observed.

3) Check v-belts for proper tension.

4) Check compressor pulley and engine

sheave are aligned and securely fastened.

QUARTERLY OR 300 HOURS (Whichever

comes first)

1) Inspect the air receiver for corrosion or

other damage.

2) Change compressor oil.

Page 14

MAINTENANCE

SCHEDULE

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

No comments

Makita MAC5501G Use and Care Manual Page 14