Makita 9561CH User Manual download pdf (Page 5)

ENGLISH (Original instructions)

Explanation of general view

1 Shaft lock

2 Slide switch

3 Speed adjusting dial

4 Wheel guard

5 Bearing box

6 Screw

7Lever

8 Lock nut

9 Depressed center grinding

wheel/Multi-disc

10 Inner flange

11 Lock nut wrench

12 Marking A

13 Marking B

14 Marking C

15 Pin

16 Vent

17 Abrasive cut-off wheel/diamond

wheel

18 Wheel guard for abrasive cut-off

wheel/diamond wheel

19 Exhaust vent

20 Inhalation vent

SPECIFICATIONS

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE048-1

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB033-5

GRINDER SAFETY WARNINGS

Safety Warnings Common for Grinding, Sanding,

Wire Brushing, or Abrasive Cutting-Off Operations:

1. This power tool is intended to function as a

grinder, sander, wire brush or cut-off tool. Read

all safety warnings, instructions, illustrations

and specifications provided with this power tool.

Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury.

2. Operations such as polishing are not recom-

mended to be performed with this power tool.

Operations for which the power tool was not

designed may create a hazard and cause personal

injury.

3. Do not use accessories which are not specifi-

cally designed and recommended by the tool

manufacturer. Just because the accessory can be

attached to your power tool, it does not assure safe

operation.

4. The rated speed of the accessory must be at

least equal to the maximum speed marked on

the power tool. Accessories running faster than

their rated speed can break and fly apart.

Model 9561CH 9562CH 9563C 9564C 9565C

Depressed center wheel diameter 115 mm 125 mm 100 mm 115 mm 125 mm

Spindle thread M14 M14 M10 M14 M14

Rated speed (n) / No load speed

(

)

12,000 min

–1

Overall length 289 mm 299 mm

Net weight 2.1 kg 2.3 kg 2.1 kg 2.4 kg 2.3 kg

Safety class /II

Model 9561CVH 9562CVH 9564CV 9565CV

Depressed center wheel diameter 115 mm 125 mm 115 mm 125 mm

Spindle thread M14 M14 M14 M14

Rated speed (n) / No load speed

(

)

2,800 – 12,000 min

–1

Overall length 289 mm 299 mm

Net weight 2.2 kg 2.3 kg 2.4 kg 2.4 kg

Safety class /II

1 2 3 4 5 6 7 8 9 10 ... 75 76

Comments to this Manuals

No comments

Makita 9561CH User Manual Page 5

Comments to this Manuals

Related products and manuals for Straight grinders Makita 9561CH