Makita HR2810T User Manual download pdf (Page 7)

P 7/ 29

[3] DISASSEMBLY/ASSEMBLY

[3] -1. Bit Holder Section

Repair

DISASSEMBLY

ASSEMBLY for HR2810T, HR2811FT

ASSEMBLY for HR2800, HR2810, HR2811F

Ring spring 21

Flat washer 24

Leaf spring

Steel ball 5.0

(4) Attach Steel ball 5.0 between the ends of Leaf spring, and mount them to the groove

between Change lever and Tool holder. (Fig. 8)

(5) Mount Flat washer 24 on Leaf spring, and secure them with Ring spring 21. (Fig. 8)

(6) As for the assembling of Cap 35 side, do the reverse of Disassembling steps.

Refer to Fig. 3.

Do the reverse of Disassembling steps. Refer to Fig. 4.

Fig. 8

Fig. 9 Fig. 10

Fig. 13Fig. 12Fig. 11

Tool holder

[3] -2. Drill Chuck Assembly (for HR2810T, HR2811FT)

Steel ball 5.0

Leaf spring

Flat washer 24

Drill chuck assembly can be disassembled as drawn in Fig. 9 - 13.

After Removing Ring spring 21, strike Drill chuck assembly against Work

bench which is covered with cloth as a cushion. Flat washer 24, Leaf spring

and Steel ball 5.0 can be removed.

Change cover

Change ring

Pull off Change cover.

Change ring and Torsion spring 31

can be removed.

Torsion

spring 31

Chuck holder

Spacer

Chuck

holder

Chuck holder

Spacer

Remove Spacer and

Steel ball 6.

Fixing Chuck holder's Flat portion

with Vise, remove Flat head screw

M6x22 using Impact driver by

turning clockwise.

Fixing Chuck holder's flat portion with Vise,

separate Drill chuck from chuck holder by

turning counterclockwise using Hex wrench

10.

Steel

ball 6

(2pcs.)

M6x22 Flat

head screw

Hex

wrench 10

Ring

spring 21

1R003

1R212

1 2 3 4 5 6 7 8 9 10 11 12 ... 28 29

Comments to this Manuals

No comments

Makita HR2810T User Manual Page 7

Comments to this Manuals

Related products and manuals for Rotary hammers Makita HR2810T