4
ENGLISH (Original instructions)
Explanation of general view
1-1. Switch lever
2-1. Adjusting dial
3-1. Power-ON indicator lamp (green)
3-2. Service indicator lamp (red)
4-1. Side grip (auxiliary handle)
5-1. D-sided side handle
5-2. Clamp nut
6-1. Bit shank
6-2. Bit grease
7-1. Releasing cover
9-1. Releasing cover
10-1. Change ring
14-1. Screws
15-1. Connector
15-2. White
15-3. Black
16-1. Crank cap cover
16-2. Screwdriver
17-1. Grease
18-1. Connector
18-2. White
18-3. Black
SPECIFICATIONS
Model HM0871C HM0870C
Blows per minute 1,100 - 2,650 min
-1
Overall length 466 mm 449 mm
Net weight 5.6 kg 5.1 kg
Safety class II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE045-1
Intended use
The tool is intended for chiselling work in concrete, brick,
stone and asphalt as well as for driving and compacting
with appropriate accessories.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model HM0871C
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 86 dB(A)
Sound power level (L
WA
) : 97 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG216-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
h,CHeq
) : 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG306-1
Work mode : chiseling function with side grip
Vibration emission (a
h,CHeq
) : 8.0 m/s
2
Uncertainty (K) : 2.0 m/s
2
For Model HM0870C
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 87 dB(A)
Sound power level (L
WA
) : 98 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG216-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
h,CHeq
) : 11.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG306-1
Work mode : chiseling function with side grip
Vibration emission (a
h,CHeq
) : 11.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
Comments to this Manuals