Makita UM40LDW Instruction Manual download pdf (Page 10)

Wheel height adjustment (six steps between

and 3-1/2" or 25 mm and

mm).

Turn off the interlock switch and remove

the key.

you are recharging the

mower, stop recharging and disconnect

the charging plug.

2. Push the lever outward and fit it into one

of the grooves for your desired cutting

height. This one touch wheel height

adjustment system can adjust all four

wheels

the same time.

CAUTIO

Always make sure that the lever is fit in the groove properly before operation.

Installing or removing

blade

WARN IN

*Always turn off the interlock switch and remove the key before installing or removing the

blade.

you are recharging the mower, stop recharging and disconnect the charging plug

*The blade coasts for several seconds after the switch is turned off. Always remove the

blade after it has come to a complete stop.

Wear gloves.

2. Turn the mower on its side to expose the blade.

3. Hold the blade holder with 32 mm wrench

that the other end of 32 mm wrench

will

contact the underside of mower deck. Hold the hex bolt with 13 mm socket wrench

and turn it lightly counterclockwise until the 32 mm wrench is firmly held by the under-

side of mower deck.

loosen the hex bolt, turn the

mm socket wrench counterclockwise while holding

down its top.

Remove the hex bolt, cup spring and blade. Be sure to remember the removal proce-

dures.

To install the blade, follow the removal procedures in reverse. Be careful not to install it

upside down. When installing the blade, always make sure that the end of blade holder

fits in the cup spring.

Tighten the hex bolt firmly with the wrenches provided. To tighten

it,

turn the

socket wrench clockwise while holding down its top. When doing

so,

the 32 mm

wrench should be firmly held by the underside of mower deck.

Deck

17/32"

mml

socket wrench

1-WZ"

132

mml

wrench

=Blade

holder

Cup spring

Hex

flange

head

bolt

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Makita UM40LDW Instruction Manual Page 10

Comments to this Manuals

Related products and manuals for Power tools Makita UM40LDW