Makita RP1100 Instruction Manual download pdf (Page 8)

003799

Secure the templet to the workpiece. Place the tool on

the templet and move the tool with the templet guide

sliding along the side of the templet.

003696

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection

or maintenance.

• Never use gasoline, benzine, thinner, alcohol or

the like. Discoloration, deformation or cracks may

result.

Replacing carbon brushes

001145

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps.

Take out the worn carbon brushes, insert the new ones

and secure the brush holder caps.

003704

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized or Factory Service

Centers, always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are

recommended for use with your Makita tool

specified in this manual. The use of any other

accessories or attachments might present a risk of

injury to persons. Only use accessory or

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Straight & groove forming bits

• Edge forming bits

• Laminate trimming bits

• Straight guide

• Templet guides

• Lock nut

• Clear base plate (Center hole 2-1/2")

• Wrench 8

• Wrench 27

• Dust nozzle

NOTE:

• Some items in the list may be included in the tool

package as standard accessories. They may differ

from country to country.

1. Brush holder

cap

2. Screwdriver

1. Limit mark

1. Router bit

2. Base

3. Templet

4. Workpiece

5. Templet guide

6. Lock nut

1. Lock nut

2. Templet guide

3. Router bit

4. Base plate

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

Makita RP1100 Instruction Manual Page 8

Comments to this Manuals

Related products and manuals for Power tools Makita RP1100