Jig Saw MODEL 4301BV Variable Speed INSTRUCTION MANUAL SPEC IF I CAT IONS Strokes Overall Net per mln Max cutting capacities Wood at 90' 1 Wo
To attach the guide rule (rip fence), use the hex wrench to loosen the bolt on the base in front, slip in the guide rule and secure the bolt. Using
Metal cutting Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause significant biade wear. The underside
MA1 NTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing c
OPTIONAL ACCESSORIES NOTE: The accessories listed in this manual are available at an extra cost from your Makita distributor or Makita factory servic
No. 6-24 No. 6- 25 No 6-26 No 6-27 14 /3,6:.mmlt:dc: Ol?,i43 q17&2 mrj;Ahq!c7 Also ideal for cutting H stainless steel 3 ~ 55 mm thick 3 ~ 55 mm
Aug -26 84 US JIG SAW Model 4301BV Note: The switch and other part configurations may differ from country to country. 15
MODEL 4301BV ITEM NO. NO. USED MAWME I 2 3 4 5 6 7 6 9 10 11 12 13 14 15 16 17 19 20 21 22 23 24 25 26 27 26 29 30 31 32 33 24 35 36 37 38 39 40 41 4
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- T
Ampere Rating More Not More Than Than 0-6 6 - 10 10 - 12 12 - 16 17. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified o
Installing Makita jig saw blade CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the blade. Use
Installing universal shank jig saw blade CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the b
Position 0 - For cutting in soft steel, stainless steel and plastics. For clean cuts in wood and plywood. Position I - For cutting in soft steel, alum
Bevel cutting With the base tilted, vou can make bevel ., cuts at any angle between 0" and 45" (left or right). Loosen the bolt on
Plunge cutting Starting a cut at other than the edge of the workpiece without first drilling a starting hole requires a "plunge cut".
Comments to this Manuals