Makita 2414NB Instruction Manual download pdf (Page 4)

18. Use outdoor extension leads.

When tool is used outdoors, use only extension

cords intended for outdoor use.

19. Stay alert.

Watch what you are doing. Use common sense.

Do not operate tool when you are tired.

20.

Check damaged parts.

Before further use of the tool, a guard or other part

that is damaged should be carefully checked to

determine that it will operate properly and perform

its intended function. Check for alignment of

moving parts, free running of moving parts,

breakage of parts, mounting and any other

conditions that may affect its operation. A guard or

other part that is damaged should be properly

repaired or replaced by an authorized service

center unless otherwise indicated in this instruction

manual. Have defective switches replaced by an

authorized service facility. Do not use the tool if the

switch does not turn it on and off.

21. Warning.

The use of any accessory or attachment, other

than those recommended in this instruction

manual or the catalog, may present a risk of

personal injury.

22. Have your tool repaired by a qualified person.

This electric tool is in accordance with the relevant

safety requirements. Repairs should only be

carried out by qualified persons using original

spare parts, otherwise this may result in

considerable danger to the user.

ENB066-1

ADDITIONAL SAFETY RULES

FOR TOOL

1. Wear protective glasses. Also wear hearing

protection during extended periods of

operation.

2. Use only wheels recommended by the

manufacturer which have a maximum

operating speed at least as high as "No Load

RPM" marked on the tool’s nameplate. Use

only fiberglass-reinforced cut-off wheels.

3. Check the wheel carefully for cracks or

damage before operation. Replace cracked or

damaged wheel immediately.

4. Secure the wheel carefully.

5. Use only flanges specified for this tool.

6. Be careful not to damage the spindle, flanges

(especially the installing surface) or bolt, or

the wheel itself might break.

7. Keep guards in place and in working order.

8. Hold the handle firmly.

9. Keep hands away from rotating parts.

10. Make sure the wheel is not contacting the

work-piece before the switch is turned on.

11. Before using the tool on an actual workpiece,

let it simply run for several minutes first.

Watch for flutter or excessive vibration that

might be caused by poor installation or a

poorly balanced wheel.

12. Watch out for flying sparks when operating.

They can cause injury or ignite combustible

materials.

13.

Remove material or debris from the area that

might be ignited by sparks. Be sure that others

are not in the path of the sparks. Keep a proper,

charged fire extinguisher closely available.

14. Use the cutting edge of the wheel only. Never

use side surface.

15. If the wheel stops during the operation, makes

an odd noise or begins to vibrate, switch off

the tool immediately.

16. Always switch off and wait for the wheel to

come to a complete stop before removing,

securing workpiece, working vise, changing

work position, angle or the wheel itself.

17. Do not touch the workpiece immediately after

operation; it is extremely hot and could burn

your skin.

18. Store wheels in a dry location only.

SAVE THESE INSTRUCTIONS.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Makita 2414NB Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for Power tools Makita 2414NB