Makita DPC7321 User Manual download pdf (Page 28)

13 1415

Press the cutting attachment (13) onto the drive arm in the

side position.

Guide the V-belt (14) over the V-belt pulley (15).

NOTE: The illustration shows the V-belt for models DPC6410

- 7321).

Put the guard plate (16) on.

Screw on nuts (17) and tighten by hand.

To tighten the V-belt see ”Tightening the V-belt / Checking V-

belt tension”.

Screw in and tighten the screw (detail X, only for DPC8112).

Tighten the nuts (17) rmly with the combination wrench.

Replace the grip (18) as shown.

IMPORTANT:

When you reposition the cutting attachment, the direction

of rotation of the cutting wheel changes.

If a rotation direction is marked on the cutting disc, make

sure the disc turns in the right direction.

Replacing/cleaning the spark arrester screen

The spark arrester screen should be checked and cleaned

regularly.

Models without catalytic converter

Loosen the 2 screws (19) and remove the spark arrester

screen (20).

Models with catalytic converter

Unscrew and remove screws (21). Remove the front housing

section of the mufer (22).

Unscrew and remove screw (23). Remove the deector plate

and spark arrester screen (24).

CAUTION:

Do not use sharp or pointed objects for screen cleaning.

Damaged or misformed screen wires may result.

Reassembly the spark arrester screen and tighten the screws.

Information on the catalytic converter: The catalytic converter

reduces the pollutant content of the exhaust.

21 22

23 24

Models without catalytic converter

Models with catalytic converter

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 67 68

No comments

Makita DPC7321 User Manual Page 28