Makita BO6040 Specifications download pdf (Page 6)

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action

CAUTION:

• Before plugging in the tool, always check to see that the

slide switch actuates properly and returns to the “OFF”

position when the rear of the slide switch is depressed.

• Switch can be locked in “ON” position for ease of

operator comfort during extended use. Apply caution

when locking tool in “ON” position and maintain firm

grasp on tool.

To start the tool, slide the slide switch toward the “I (ON)”

position. For continuous operation, press the front of the

slide switch to lock it.

To stop the tool, press the rear of the slide switch, then slide

it toward the “O (OFF)” position.

Speed adjusting dial

The rotating speed can be changed by turning the speed

adjusting dial to a given number setting from 1 to 5.

Higher speed is obtained when the dial is turned in the direc-

tion of number 5. And lower speed is obtained when it is

turned in the direction of number 1.

Refer to the table for the relationship between the number

settings on the dial and the approximate rotating speed.

CAUTION:

• If the tool is operated continuously at low speeds for a

long time, the motor will get overloaded, resulting in tool

malfunction.

1. Slide switch

003287

1. Speed adjusting dial

003289

Number

Orbits per min.

1,600

2,100

3,600

5,100

5,800

Roto-orbit pad rotating

speed per min.

180

240

420

590

670

003290

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments

Makita BO6040 Specifications Page 6

Comments to this Manuals

Related products and manuals for Power sanders Makita BO6040