Makita N1923B User Manual download pdf (Page 6)

ENGLISH (Original instructions)

Explanation of general view

1 Knob

2 Switch trigger

3 Lock button/Lock-off button

4Bolts

5Drum

6 Planer blade

7Drum plate

8 Adjusting plate

9 Inside edge of gauge plate

10 Blade edge

11 Screws

12 Heel

13 Back side of gauge base

14 Gauge plate

15 Gauge base

16 Pan head screw

17 Planer blade locating lugs

18 Heel of adjusting plate

19 Set plate

20 Inside flank of gauge plate

21 Mini planer blade

22 Groove

23 Hex. flange head bolt

24 Vacuum cleaner

25 Nozzle assembly

26 Chip cover screw

27 Chip cover

28 Fit the pin on nozzle assembly

into this hole.

29 End

30 Start

31 Cutting line

32 Edge fence

33 Screw

34 V groove

35 Sharpening holder

36 Wing nut

37 Blade (A)

38 Blade (B)

39 Side (C)

40 Side (D)

41 Limit mark

42 Screwdriver

43 Brush holder cap

SPECIFICATIONS

Model N1923B

Planing width ........................................................ 82 mm

Planing depth ......................................................... 1 mm

Shiplapping depth ................................................ 23 mm

No load speed (min

–1

) .......................................... 17,000

Overall length ..................................................... 293 mm

Net weight ............................................................. 3.1 kg

Safety class.............................................................. /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE001-1

Intended use

The tool is intended for planing wood.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future reference.

GEB010-4

PLANER SAFETY WARNINGS

1. Wait for the cutter to stop before setting the tool

down. An exposed cutter may engage the surface

leading to possible loss of control and serious injury.

2. Hold the power tool by insulated gripping sur-

faces only, because the cutter may contact its

own cord. Cutting a “live” wire may make exposed

metal parts of the power tool “live” and could give

the operator an electric shock.

3. Use clamps or another practical way to secure

and support the workpiece to a stable platform.

Holding the work by hand or against your body

leaves it unstable and may lead to loss of control.

4. Rags, cloth, cord, string and the like should

never be left around the work area.

5. Avoid cutting nails. Inspect for and remove all

nails from the workpiece before operation.

6. Use only sharp blades. Handle the blades very

carefully.

7. Be sure the blade installation bolts are securely

tightened before operation.

8. Hold the tool firmly with both hands.

9. Keep hands away from rotating parts.

10. Before using the tool on an actual workpiece, let

it run for a while. Watch for vibration or wobbling

that could indicate poor installation or a poorly

balanced blade.

11. Make sure the blade is not contacting the work-

piece before the switch is turned on.

12. Wait until the blade attains full speed before cut-

ting.

13. Always switch off and wait for the blades to

come to a complete stop before any adjusting.

14. Never stick your finger into the chip chute.

Chute may jam when cutting damp wood. Clean

out chips with a stick.

15. Do not leave the tool running. Operate the tool

only when hand-held.

16. Always change both blades or covers on the

drum, otherwise the resulting imbalance will

cause vibration and shorten tool life.

17. Use only Makita blades specified in this manual.

18. Always use the correct dust mask/respirator for

the material and application you are working

with.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product.

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

1 2 3 4 5 6 7 8 9 10 11 ... 59 60

Comments to this Manuals

No comments

Makita N1923B User Manual Page 6

Comments to this Manuals

Related products and manuals for Power planers Makita N1923B