Makita TW0350 User Manual download pdf (Page 6)

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action

CAUTION:

• Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

• Change the direction of rotation only when the tool

comes to a complete stop. Changing it before the tool

stops may damage the tool.

The switch is reversible, providing either clockwise or coun-

terclockwise rotation. To start the tool, simply pull the lower

part of the switch trigger for clockwise or the upper part for

counterclockwise. Release the switch trigger to stop.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Selecting correct socket

Always use the correct size socket for bolts and nuts. An

incorrect size socket will result in inaccurate and inconsistent

fastening torque and/or damage to the bolt or nut.

Installing or removing socket

CAUTION:

• Always be sure that the tool is switched off and

unplugged before installing or removing the socket.

Align the hole in the side of the socket with the detent pin on

the anvil and push it onto the anvil of the tool until it locks into

place. Tap it lightly if required.

To remove the socket, simply pull it off.

1. Switch trigger

004006

1. Socket

2. Anvil

004007

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Makita TW0350 User Manual Page 6