Makita UH4570 Instruction Manual Page 1

1 ENGLISH (Original instructions) INSTRUCTION MANUAL DOUBLE INSULATION Hedge TrimmerUH4570 UH5570 UH6570 009277 IMPORTANT: Read Before Using.

10 1 009298 Remove two screws from the shear blades and the shear blade unit will be taken out. 12 009299 CAUTION: • Return the gear to the origina

11 Storage The hook hole in the bottom of the blade cover is convenient for hanging the tool from a nail or screw on the wall. 009305 Put the blade

12 Makita Corporation Anjo, Aichi, Japan 884840E228

2 ENGLISH (Original instructions) SPECIFICATIONS Model UH4570 UH5570 UH6570 Blade length 450 mm 550 mm 650 mm Strokes per minute (min-1) 1,600 1,6

3 Designation of Machine: Hedge trimmer Model No./ Type: UH4570, UH5570, UH6570 Specifications: see "SPECIFICATIONS" table. are of series

4 15. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. 16. Dr

5 11. Work gloves of stout leather are part of the basic equipment of the hedge trimmer and must always be worn when working with it. Also wear sturd

6 Far area cut 009282 To trim the hedge in far area with both hands pull the switch triggers A and C. ASSEMBLY CAUTION: • Always be sure that the t

7 Arm cord hook (Accessory) CAUTION: • Do not attach the holder of arm cord hook to other than the extension cord. Do not attach it in a position cl

8 009286 Attaching the chip receiver (accessory) on the tool when trimming the hedge straight can avoid cut off leaves' being thrown away. 00

9 12 009293 CAUTION: • The blade cover (standard equipment) cannot be installed on the tool with the chip receiver being installed. Before carrying