Makita Pump EW400R Instruction Manual download pdf (Page 13)

"HOW

TOWAINTENANCE

INSPECTING THE SPARK PLUG

Clean

off

carbon deposits on the plug

electrode using a plug cleaner or wire

brush.

Check electrode gap.

Adjust it to between

0.02

and

0.03

inches.

(0.6

and 0.7")

ENGINE OIL CHANGE

Initial oil change

......

hours of operation

Thereafter.. .Every

hours of operation

:CAUTION]-

Make sure the fuel cap is tightly se-

cured to avoid spillage.

. When changing oil, stop the engine

and loosen the drain plug.

Tighten the drain plug before refilling.

. Refer to the recommended oil table

on page

Always use the proper grade and

clean oil. If the engine oil is contam-

inated, there is not enough or

is of

poor quality, engine life will be short-

ened.

0.6-0.7mm

-&-

(0.02-0.03

in.)

CLEANING FUEL STRAINER

Check for water or contaminants in the fuel strainer.

remove contaminants, close the fuel cock and remove the strainer cup.

After removing contaminants and water, wash the strainer cup with kerosene.

Reinstall it securely to prevent leakage.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Makita Pump EW400R Instruction Manual Page 13

Comments to this Manuals