Makita UT2204 User Manual download pdf (Page 5)

When installing the mixing blades at two different

positions (which is applicable only to the mixing blades

allowed to do so), mount and secure the two mixing

blades on the flat part of the shaft with the hex bolts so

that the same surface of blades faces each other as

shown in the figure.

Fig.7

Fig.8

OPERATION

Mixing

CAUTION:

• Do not use to mix flammable material such as paint

with thinner used as solvent. Failure to do so may

cause injury.

1. Hold the rear handle of the tool with one hand and

the grip with the other hand firmly, place the

mixing blade under material fully and turn on the

tool after making sure work site safety.

2. Move the mixing blade up and down during the

mixing operation so that whole part of material can

be mixed.

3. When finishing mixing, turn off the tool, make sure

that the mixing blade has come to a complete stop,

and then pull it out of the vessel.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection

or maintenance.

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may

result.

Replacing filter

Fig.9

Replace the filter regularly as the cooling efficiency of the

tool is reduced due to built-up dust or particles in the

filter.

Insert the slotted bit screwdriver and the like between the

tool and the cover as shown in the figure. Lift it up just like

using a shovel and remove the cover.

Replace the filter in the cover with a new one.

Reinstall the cover on the tool.

Replacing carbon brushes

Fig.10

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take

out the worn carbon brushes, insert the new ones and

secure the brush holder caps.

Fig.11

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are

recommended for use with your Makita tool

specified in this manual. The use of any other

accessories or attachments might present a risk of

injury to persons. Only use accessory or

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Mixing blades

• Shaft

NOTE:

• Some items in the list may be included in the tool

package as standard accessories. They may differ

from country to country.

1 2 3 4 5 6 7 8 9 10 ... 31 32

Comments to this Manuals

No comments

Makita UT2204 User Manual Page 5

Comments to this Manuals

Related products and manuals for Mixers Makita UT2204