Makita UT2204 User Manual download pdf (Page 4)

30.1.2009

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

GEA010-1

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for

future reference.

GEB087-1

MIXER SAFETY WARNINGS

1. Use auxiliary handle(s), if supplied with the

tool. Loss of control can cause personal injury.

2. Hold power tool by insulated gripping

surfaces, when performing an operation

where the cutting accessory may contact

hidden wiring or its own cord. Cutting

accessory contacting a "live" wire may make

exposed metal parts of the power tool "live" and

could give the operator an electric shock.

3. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

4. Hold the tool firmly.

5. Keep hands away from rotating parts.

6. Do not leave the tool running. Operate the tool

only when hand-held.

7. Some material contains chemicals which may

be toxic. Take caution to prevent dust

inhalation and skin contact. Follow material

supplier safety data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on

the tool.

Switch action

Fig.1

CAUTION:

• Before plugging in the tool, always check to see

that the switch trigger actuates properly and returns

to the "OFF" position when released.

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

Indicator lamp

Fig.2

The green power-ON indicator lamp lights up when the

tool is plugged to the mains. If the indicator lamp is lit but

the tool does not start even if the tool is switched ON, the

carbon brushes may be worn out, or the motor or the

switch may be defective. If the indicator lamp does not

light up, the mains cord or the indicator lamp may be

defective. When the mains cord is defective, the tool

neither starts nor lights the indicator lamp. When the

indicator lamp is defective, the tool starts without the

indicator lamp lighting up.

ASSEMBLY

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Installing shaft

Fig.3

Tighten the shaft with hex nut into the shaft holder as far

as the hex nut comes into contact with the holder.

Hold the notch in the shaft holder with wrench 19 so that

it cannot revolve. With the notch held so, tighten the hex

nut with another wrench 19 in the direction of arrow.

Fig.4

Installing mixing blades

Fig.5

Fig.6

Insert the mixing blade into the shaft and secure it with

the hex bolt.

At this time, position it so that the top end of the hex bolt

always fits to the flat surface on the shaft and tighten the

hex bolt with the provided wrench.

1 2 3 4 5 6 7 8 9 ... 31 32

Comments to this Manuals

No comments

Makita UT2204 User Manual Page 4

Comments to this Manuals

Related products and manuals for Mixers Makita UT2204