Makita LXRM03 Instruction Manual download pdf (Page 9)

controls. The radio controls can be used for Menu/Select,

Previous/Next, Fast Rewind/Fast Forward and Play/

Pause functions.

1. Use the Menu/Info button to navigate to higher

level menus on your iPod/iPhone.

2. Rotate the Tuning control as required to move up

or down a menu screen on your iPod/iPhone.

3. Press the Tuning control to select the highlighted

option on your screen menu.

Note:

If this item is a lower level menu item, you may then

navigate further by pressing the Tuning control.

Playing an audio file on your iPod/

iPhone

1. When you have found the desired item, press the

Tuning control on the radio to start the iPod

playing.

2. Adjust the volume to the required setting using the

Tuning control on your radio.

• To adjust the volume, you need to make sure the

word “iPod” on the screen is not flashing.

• Press the preset button (1-5) at any point If you want

to cease the word “iPod” from flashing.

3. To pause playback press the Play/Pause button

. To resume playback press the Play/Pause

button again.

4. iPods do not have a Stop button (they use the Pause

function). To play an alternative selection, use the

iPod menus to make the selection using the Play/

Pause button to stop playing the current

item if needed.

5. If it was previously playing, your iPod/iPhone will

switch on and continue playing from where it was

previously stopped.

Note:

Your LXRM03 does not support video file but only music

file.

Note:

When Video File List was selected, please press Select

button.

Search function

1. Press either the Fast-Forward or Back-

forward button to start playing the next or

previous track.

2. While the iPod/iPhone is playing, press and hold the

Fast-Forward or Back-forward buttons

to move through the current file or track,

and then release the button when the desired point in

the file or track is reached.

3. To select a desired track among folders, press the

Folder Up/Down button , to

select a desired track in different folder.

Clock and Alarms

Setting the time format

The clock display used in stand-by mode and on the

playing mode screens can be set to 12 or 24 hour format.

The selected format is then also used when setting the

alarms.

1. Press and hold the Menu/Info button to enter the

menu setting.

2. Rotate the Tuning control until “CLOCK xxH”

appears on the display and press the Tuning control

to enter the setting. You will see the time format

begins to flash.

3. Rotate the Tuning control to select either 12 or 24

hour format. Press the Tuning control to confirm

your choice of clock format.

Note:

If the 12 hour clock format is chosen, the radio will then

use the 12 hour clock for the setting.

Setting the clock time and date

1. Press and hold the Menu/Info button .

2. Rotate the Tuning control until “CLOCK ADJ”

appears on the display. Press the Tuning control

to enter the setting.

3. The hour setting on the display will begin flashing.

Rotate the Tuning control to select the desired

hour, and press the Tuning control to confirm the

setting. Then rotate the Tuning control to select

the desired minute, and press the Tuning control

to confirm the setting.

4. Rotate the Tuning control until “DATE ADJ”

appears on the display. Press the Tuning control

to enter the setting.

5. Rotate the Tuning control to select the desired

year and press the Tuning control to confirm the

setting. Then rotate the Tuning control to select

the desired month, and press the Tuning control

to confirm the setting. Then rotate the Tuning control

to select the desired date and press the Tuning

control to confirm the setting.

Radio Data System (RDS)

When you set the clock time using the RDS function, your

radio will synchronize its clock time whenever it tunes to a

radio station using RDS with CT signals.

1. When tuning to a station transmitting RDS data, press

and hold the Menu/Info button .

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Comments to this Manuals

No comments

Makita LXRM03 Instruction Manual Page 9

Comments to this Manuals