Makita BDF448RFE Instruction Manual download pdf (Page 5)

ENGLISH (Original instructions)

Explanation of general view

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change without

notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Intended use

ENE034-1

The tool is intended for drilling and screw driving in wood,

metal and plastic.

General Power Tool Safety

Warnings

GEA010-1

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

CORDLESS DRIVER DRILL

SAFETY WARNINGS

GEB088-1

1. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

2. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting

accessory contacting a “live” wire may make exposed

metal parts of the power tool “live” and could give the

operator an electric shock.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting a

“live” wire may make exposed metal parts of the

power tool “live” and could give the operator an

electric shock.

4. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

5. Hold the tool firmly.

6. Keep hands away from rotating parts.

7. Do not leave the tool running. Operate the tool

only when hand-held.

8. Do not touch the drill bit or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

9. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation and

skin contact. Follow material supplier safety data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to safety

rules for the subject product. MISUSE or failure to

follow the safety rules stated in this instruction

manual may cause serious personal injury.

1. Red indicator

2. Button

3. Battery cartridge

4. Star marking

5. Switch trigger

6. Lamp

7. Reversing switch lever

8. Speed change lever

9. Action mode changing ring

10. Arrow

11. Adjusting ring

12. Graduation

13. LED indicator

14. Groove

15. Protrusion

16. Steel band

17. Grip base

18. Side grip

19. Sleeve

20. Bit holder

21. Bit

22. Hook

23. Screw

24. Limit mark

25. Rear cover

26. Screws

27. Arm

28. Spring

29. Recessed part

30. Carbon brush cap

31. Hole

Model BDF448 BDF458

Capacities

Drilling into steel 13 mm 13 mm

Drilling into wood 65 mm 76 mm

Fastening wood screw 8 mm x 75 mm 10 mm x 90 mm

Fastening machine screw 6 mm

No load speed (min

-1

)

High (2) 0 - 1,800 0 - 2,000

Low (1) 0 - 350 0 - 400

Overall length 225 mm

Net weight 2.2 kg 2.3 kg

Rated voltage D.C. 14.4 V D.C. 18 V

1 2 3 4 5 6 7 8 9 10 ... 59 60

Comments to this Manuals

No comments

Makita BDF448RFE Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for Cordless combi drills Makita BDF448RFE