Makita BDF442 Instruction Manual download pdf (Page 4)

ENGLISH

Explanation of general view

SPECIFICATIONS

• Due to our continuing program of research and development, the specifications herein are subject to change without

notice.

• Note: Specifications may differ from country to country.

Symbols

END001-1

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

Only for EU countries

Do not dispose of electric equipment together with

household waste material!

In observance of European Directive 2002/96/EC on

waste electrical and electronic equipment and its

implementation in accordance with national law, electric

equipment that have reached the end of their life must be

collected separately and returned to an environmentally

compatible recycling facility.

Intended use

ENE034-1

The tool is intended for drilling and screw driving in wood,

metal and plastic.

GENERAL SAFETY RULES GEA002-3

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock, fire

and/or serious injury. The term “power tool” in all of the

warnings listed below refers to your mains-operated

(corded) power tool or battery-operated (cordless) power

tool.

SAVE THESE INSTRUCTIONS.

Work area safety

1. Keep work area clean and well lit. Cluttered and

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause you

to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

1. Red part

2. Button

3. Battery cartridge

4. Switch trigger

5. Lamp

6. Reversing switch lever

7. Speed change lever

8. Adjusting ring

9. Graduation

10. Pointer

11. Sleeve

12. Bit holder

13. Bit

14. Groove

15. Screw

16. Hook

17. Limit mark

18. Rear cover

19. Screws

20. Recessed part

21. Spring

22. Arm

23. Carbon brush cap

24. Hole

25. Carbon brush cap

Model BDF442 BDF452

Capacities

Steel 13 mm 13 mm

Wood 38 mm 38 mm

Wood screw 6 mm x 75 mm 10 mm x 89 mm

Machine screw M6 M6

No load speed (min

-1

)

High (2) 0 - 1,400 0 - 1,500

Low (1) 0 - 400 0 - 400

Overall length 197 mm 197 mm

Net weight (with type of battery cartridge) 1.7 kg (BL1430) 1.8 kg (BL1830)

Rated voltage D.C. 14.4 V D.C. 18 V

1 2 3 4 5 6 7 8 9 ... 27 28

Comments to this Manuals

No comments

Makita BDF442 Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for Cordless combi drills Makita BDF442