Makita 9528PB Instruction Manual download pdf (Page 7)

Operation

Hold

the tool firmly. Turn the tool on and

then apply the wheel or disc to

the

work-

piece.

In general, keep the edge

the wheel or

disc

an angle of about 15" to the work-

piece surface.

During the break-in period with

new

wheel, do not work the grinder

the

direction or

will cut into the workpiece.

Once the edge

the wheel has been

rounded off

use, the wheel may be

worked in both

and

directions.

WARNING:

It should never be necessary to force the tool. The weight of the tool applied adequate

pressure. Forcing and excessive pressure could cause dangerous when wheel breakage.

Continued use of

worn-out wheel may result in wheel explosion and serious personal

injury. Depressed center wheel should not be used after

has beeen worn down to

(3")

in diameter for Model 9526PB or 90 mm (3-1/2") for Models 9527PB and

9528PB in diameter. Use of the wheel after this point

unsafe and

should be re-

moved from service and rendered unusable by intentional destruction.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Makita 9528PB Instruction Manual Page 7