Makita 9526NB Instruction Manual

I Overall length Net weight MODEL No load speed (RPM) 9526NB 10,000 256 mm (10") 1.4 kg 13.1 Ibs) 9527NB 10,000 256 mm (10") 1.4 kg (3

5Rubber pad 6,Abrasive discs or Model 9526NB @Lock nut 10-30 (For abrasive disc) (@Wire cup brush 75 @)Wire bevel brush 85 (9) Wheel guard assembly

@Cut-off wheel Part No. Size Grit Wheels per pkg. For use 724104-110 4" x 3/32" x 5/8" 36 10 For masonry and concrete. 724107-510

Aup.-19-’98 US Note: The switch, noise suppressor and other part configurations may differ from country to country. 12

MODEL 9526NB Aug-l9--'96 US DESCRIPTION IFOM ztD DESCAlPTlON MACHINE MACHINE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 - 4 1 1 1 1 1

Aug.-19--'96 US ANGLE GRINDER 1 15 mm (4-1 /2") Model 9527NB 125 mm (5") Model 9528NB Note: The switch, noise suppressor and other p

MODEL 9527NB. 9528NB 'i\M G2D DESCRIPTION 1 1 1 2 1 1 2 1 2 2 1 1 1 1 1 1 1 1 1 1 1 Aug.-19-'96 US 'EM AtD DESCRIPTION Compression Spr

MAKFA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thorou ly inspected and tested before leaving the factory. It is warranted to

GENERAL SAFETY RULES (For All Tools) WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may result in e

11. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have

SPECIFIC SAFETY RULES FOR GRINDER 1. Always use proper guard with grinding wheel. A guard protects operator from broken wheel fragments. 2. Accessor

Installing the wheel guard I Mount the wheel guard with the tab on the wheel guard band aligned with the notch on the bearing box. Then rotate the wh

To tighten the lock nut, press the shaft lock firmly so that the spindle cannot revolve, then use the lock nut wrench and securely tighten clockwi

Operation Hold the tool firmly. Turn the tool on and then apply the wheel or disc to the work- piece. In general, keep the edge of the wheel or disc

MAINTENANCE CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing carb

OPTIONAL ACCESSORIES The accessories listed in this manual are available at an extra cost from your Makita distributor or Makita factory service ce