Makita VC4710 Operations Instructions download pdf (Page 18)

Makita VC4710

Original Instruction

6 Maintenance

6.1 Maintenance plan

After finishing work When required

7.2.1 Emptying tank



7.2.2 Emptying tank after wet suction



7.2.3 Replacing the filter bag



7.2.4 Replacing the disposal bag



7.2.5 Replacing filter element



6.2 Maintenance work

Any other maintenance than

described in chapter 6 should be

performed by Makita factory service

center.

6.2.1 Emptying the tank

After emptying the tank: clean the

rim of the tank and the seals in the

intermediate ring and the upper sec-

tion of vacuum before refitting them.

If the seal or groove is dirty or dam-

aged, the suction performance will

be reduced.

Before reinserting the suction hose:

clean the inlet fitting and hose col-

lar.

1. Be sure that the vacuum is

switched off and unplugged.

2. Open the retaining clamps (A)

and remove the upper sec-

tion of the vacuum cleaner.

3. Tip out the collected mate-

rial.

4. The material collected must

be disposed of in accor-

dance with the applicable

regulations.

5. Attach the upper section of

the vacuum.

6. Close the retaining clamps

(B). Ensure that the retaining

clamps fit properly.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 71 72

Comments to this Manuals

No comments

Makita VC4710 Operations Instructions Page 18

Comments to this Manuals

Related products and manuals for Vacuum cleaners Makita VC4710