Makita BTD150 User Manual download pdf (Page 14)

Use a screwdriver to remove the brush holder caps. Take out

the worn carbon brushes, insert the new ones and secure

the brush holder caps.

After replacing brushes, insert the battery cartridge into the

tool and break in brushes by running tool with no load for

about 1 minute. Then check the tool while running and elec-

tric brake operation when releasing the switch trigger. If elec-

tric brake is not working well, ask your local Makita service

center for repair.

To maintain product SAFETY and RELIABILITY, repairs, any

other maintenance or adjustment should be performed by

Makita Authorized or Factory Service Centers, always using

Makita replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The

use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding these

accessories, ask your local Makita service center.

• Screw bits

• Magnetic nutsetter (Size: 1/4”, 5/16”, 3/8”)

• Shoulder strap

• Automatic refreshing adapter

• Plastic carrying case

1. Brush holder cap

2. Screwdriver

001268

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Makita BTD150 User Manual Page 14