Makita AT2550A User Manual download pdf (Page 7)

ENGLISH (Original instructions)

Explanation of general view

1 Compressor air output per

minute

2 Stapling frequency (times/min)

3 Depth adjusting plate

4 Hex wrench

5 Hook

6Screw

7 Lock pin

8 Pusher

9 Air fitting

10 Air socket

11 Trigger

12 Contact element

13 Workpiece

14 Exhaust cover

15 Driver guide

16 Latch

17 Slotted bit screwdriver

18 Latch

19 Door

20 Drain cock

21 Air filter

22 Oiler

23 Pneumatic oil

SPECIFICATIONS

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENB103-1

IMPORTANT SAFETY INSTRUCTIONS

WARNING: WHEN USING THIS TOOL, BASIC

SAFETY PRECAUTIONS SHOULD ALWAYS BE FOL-

LOWED TO REDUCE THE RISK OF PERSONAL

INJURY, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS.

• For personal safety and proper operation and main-

tenance of the tool, read this instruction manual

before using the tool.

• Always wear safety glasses to protect your eyes

from dust or staple injury.

WARNING:

It is an employer’s responsibility to enforce the use

of safety eye protection equipment by the tool

operators and by other persons in the immediate

working area.

• For Australia and New Zealand only

Always wear safety glasses and face shield to pro-

tect your eyes from dust or staple injury. The safety

glasses and the face shield should conform with

the requirements of AS/NZS 1336.

WARNING:

It is an employer’s responsibility to enforce the use

of safety eye protection equipment by the tool

operators and by other persons in the immediate

working area.

• Wear hearing protection to protect your ears

against exhaust noise and head protection. Also

wear light but not loose clothing. Sleeves should

be buttoned or rolled up. No necktie should be

worn.

• Rushing the job or forcing the tool is dangerous.

Handle the tool carefully. Do not operate when

under the influence of alcohol, drugs or the like.

General Tool Handling Guidelines:

1. Always assume that the tool contains fasteners.

2. Do not point the tool toward yourself or anyone

whether it contains fasteners or not.

3. Do not activate the tool unless the tool is placed

firmly against the workpiece.

4. Respect the tool as a working implement.

5. No horseplay.

6. Do not hold or carry the tool with a finger on the

trigger.

7. Do not load the tool with fasteners when any one

of the operating controls is activated.

8. Do not operate the tool with any power source

other than that specified in the tool operating/

safety instructions.

• An improperly functioning tool must not be used.

Model AT1150A AT2550A

Air pressure 0.44 – 0.83 MPa (4.4 – 8.3 bar)

Applicable staples 25 mm – 50 mm

Staple capacity 140 pcs.

Min. hose diameter 6.5 mm

Dimensions (L x W x H) 370 mm x 87 mm x 290 mm 370 mm x 76 mm x 260 mm

Net weight 1.8 kg 2.2 kg

Safety glasses

Face shield

1 2 3 4 5 6 7 8 9 10 11 12 ... 67 68

Comments to this Manuals

No comments

Makita AT2550A User Manual Page 7

Comments to this Manuals

Related products and manuals for Staple guns Makita AT2550A