Makita HR3000C Instruction Manual

1 ENGLISH (Original instructions) INSTRUCTION MANUAL DOUBLE INSULATION IMPORTANT: Read Before Using. Rotary HammerHR3000C 003097

10 1 003246 Reinstall the crank cap and tighten with the hex wrench. Connect the connector and reinstall the handle. 123 003248 CAUTION: • Do not t

11

12 Makita CorporationAnjo, Aichi, Japanwww.makita.com 884253E223

2 ENGLISH (Original instructions) SPECIFICATIONS Model HR3000C Concrete 30 mm Core bit 90 mm Steel 13 mm Capacities Wood 30 mm No load speed (min-1)

3 used. • Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (ta

4 up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

5 14. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety

6 Hammering only 12 003134 For chipping, scaling or demolition operations, depress the lock button and rotate the change lever so that the pointer po

7 Installing or removing the bit 21 003150 Clean the bit shank and apply bit grease before installing the bit. Insert the bit into the tool. Turn the

8 Bit diameterDust cup 56 mm - 14.5 mmDust cup 912 mm - 16 mm 006406 OPERATION Hammer drilling operation 003198 Set the change lever and the shift

9 serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool. MAINTENANCE CAUTION: • Always be sure