Makita HR2641 Use and Care Manual

1 ENGLISH (Original instructions) INSTRUCTION MANUAL DOUBLE INSULATION IMPORTANT: Read Before Using. Combination Hammer HR2631F HR2631FT HR2641 HR23

10 After drilling the hole, use the blow-out bulb to clean the dust out of the hole. Chipping/Scaling/Demolition 015356 Set the action mode changing

11 123 015363 Hold the ring and turn the sleeve counterclockwise to open the chuck jaws. Place the bit in the chuck as far as it will go. Hold the ri

12 Makita Corporationwww.makita.com 885385-3

2 ENGLISH (Original instructions) SPECIFICATIONS Model HR2631FHR2631FT HR2641 HR2320T HR2630 HR2630T Concrete 26 mm 23 mm 26 mm Core bit 68 mm Dia

3 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric

4 GEB007-7 ROTARY HAMMER SAFETY WARNINGS 1. Wear ear protectors. Exposure to noise can cause hearing loss. 2. Use auxiliary handle(s), if supplied w

5 1 015337 To turn on the lamp, pull the trigger. Release the trigger to turn it off. NOTE: • Use a dry cloth to wipe the dirt off the lens of lamp

6 Attaching the quick change drill chuck 4231 015340 Check the line of the quick change drill chuck shows the symbol. Grasp the change cover of the

7 ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Side grip (auxiliary handl

8 Press the lock button on the grip base in the direction of arrow shown in the figure and with the lock button being pressed insert the depth gauge i

9 12 011507 12345 015256 12 012896 NOTE: • When installing or removing the dust cup, the cap may come off the dust cup. At that time, proceed as f