Makita HR2450F User Manual download pdf (Page 9)

Installing or removing the bit

Clean the bit shank and apply bit grease before installing the

bit.

Insert the bit into the tool. Turn the bit and push it in until it

engages.

After installing, always make sure that the bit is securely held

in place by trying to pull it out.

To remove the bit, pull the chuck cover down all the way and

pull the bit out.

Bit angle (when chipping, scaling or demolishing)

The bit can be secured at the desired angle. To change the

bit angle, depress the lock button and rotate the action mode

changing knob to the O symbol. Turn the bit to the desired

angle.

1. Bit shank

2. Bit grease

001296

1. Bit

2. Chuck cover

001297

1. Bit

2. Chuck cover

001298

1. Lock button

2. Action mode changing knob

003576

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Makita HR2450F User Manual Page 9