Makita LXRM03 Instruction Manual download pdf (Page 9)

Language options (only available in

BMR105)

There are four language options available in the radio:

English, German, Italian and French.

1. Press Advanced setting button.

2. Rotate the Volume/Tuning Control/Select knob until

“Language” shown on the display. Press the Volume/

Tuning Control/Select knob to enter the setting.

3. Rotate the Volume/Tuning Control/Select knob to

choose your desired language. Press the Volume/

Tuning Control/Select knob to confirm your setting.

Brightness control

The backlight of the display can be adjusted.

1. Press the Advanced setting button.

2. Rotate the Volume/Tuning Control/Select knob until

“Backlight” shown on the display. Press the Volume/

Tuning Control/Select knob to enter the setting.

3. Rotate the Volume/Tuning Control/Select knob to

choose to enable or disable the backlight function,

then press the Volume/Tuning Control/Select knob to

confirm the setting.

System reset

If your radio fails to work correctly, or some digits on the

display are missing or incomplete, carry out the following

procedure.

1. Press the Advanced setting button.

2. Rotate the Volume/Tuning Control/Select knob until

“Factory Reset” shown on the display. Press the

Volume/Tuning Control/Select knob to enter the

setting.

3. Rotate the Volume/Tuning Control/Select knob to

choose “Yes”. Press the Volume/Tuning Control/

Select knob to confirm the setting and a full reset will

be performed.

Software version

1. Press the Advanced setting button.

2. Rotate the Volume/Tuning Control/Select knob until

“SW Version” shown on the display. Press the

Volume/Tuning Control/Select knob to view the

software version installed in the radio.

Micro USB port for software upgrade

Software updates for your radio may be available in the

future.

As software updates become available software and

information on how to update your radio can be found at

Makita website.

How to play other audios

CAUTION:

Unplug this apparatus before connecting other audios.

• There are 2 AUX IN sockets. AUX IN 1 is located on

the front panel, and AUX IN 2 is located in the battery

compartment.

• Connect a stereo or mono source (i.e. iPod, MP3, or

CD player) to either AUX IN 1 or AUX IN 2 by audio

cord.

• Repeatedly press and release the Band button until

“AU1” or “AU2” is displayed, then AUX function is

activated.

MAINTENANCE

CAUTION:

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

Specifications:

Power requirements

AC power adaptor DC12 V 1A, center pin positive

Battery Cluster battery: 7.2 V - 18 V

Slide battery: 9.6 V - 18 V

Frequency coverage FM 87.50 - 108 MHz

DAB/DAB+ 174.928 - 239.200 MHz

DAB/DAB+ Channel block

DAB (Band III) 5A-13F

Compatible standard DAB (BMR104)

DAB/DAB+ (BMR105)

Circuit feature

Loudspeaker 3 inches 8 ohm

Output power 7.2 V: 0.5 W x 2, 9.6 V: 1 W x 2

10.8 V: 1.2 W x 2, 12 V: 1.5 W x 2

14.4 V: 2.2 W x 2, 18 V: 3.5 W x 2

Input terminal 3.5 mm dia. (AUX IN1/AUX IN2)

Antenna system DAB/FM: soft bended rod antenna

Dimension (W x H x D) in mm

280 x 302 x 163

Weight 4 kg (without battery)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 91 92

Comments to this Manuals

No comments

Makita LXRM03 Instruction Manual Page 9

Comments to this Manuals

Related products and manuals for Radios Makita LXRM03