Makita TM3000C Instruction Manual download pdf (Page 6)

012850

When using application tools with a different type of

installation section, use a correct adapter (optional

accessory).

OPERATION

WARNING:

• Before starting the tool and during operation, keep

your hand and face away from the application tool.

• Do not apply excessive load to the tool which may

cause a motor lock and stop the tool.

Cutting, sawing and scraping

012889

Put the application tool on the workpiece.

And then move the tool forward so that the application

tool movement does not slow down.

NOTE:

• Forcing or excessive pressure on the tool may

reduce efficiency.

• Before cutting operation, it is recommended to

preset the orbital stroke rate 3 - 5.

Sanding

WARNING:

• Do not reuse a sanding paper used for sanding

metal to sand wood.

• Do not use a worn sanding paper or sanding paper

without grit.

012853

Apply a sanding paper on the workpiece.

NOTE:

• Using a test material sample to try is

recommendable to determine a correct orbital

stroke rate suitable for your work.

• Use a sanding paper with the same grit until

sanding the whole workpiece is completed.

Replacing a sanding paper with different grit

sanding paper may not get a fine finish.

Dust extraction attachment

(optional accessory)

012854

1. Joint

2. Nozzle band

3. Dust nozzle

4. Dust attachment

5. Felt ring

6. Pad

7. Application tool installation bolt

1. Application tool

installation bolt

2. Holes in the

application tool

3. Adapter

4. Protrusions of

the tool flange

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Makita TM3000C Instruction Manual Page 6

Comments to this Manuals

Related products and manuals for Power tools Makita TM3000C