Makita HM1800 Specifications download pdf (Page 6)

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action

CAUTION:

• Before plugging in the tool, always check to see that the

switch lever actuates properly and returns to the “OFF”

position when released.

To start the tool, simply squeeze the switch lever. Release

the switch lever to stop.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Installing or removing the bit

This tool accepts bits either with or without a collar on its

shank.

To install the bit, follow either procedure (1) or (2) described

below.

(1) For bits with a collar

Pivot the tool retainer back and slightly downward. Insert

the bit into the tool holder as far as it will go. To securely

retain the bit, return the tool retainer to its original posi-

tion.

1. Switch lever

002892

1. Bit with collar

2. Bit without coller

002928

1. Bit 2. Tool retainer

3. Tool holder 4. When the bit is inserted

5. When the bit is retained

Fig.(1)

002934

1 2 3 4 5 6 7 ... 16

No comments

Makita HM1800 Specifications Page 6