Makita DTD146 Instruction Manual

1 ENGLISH (Original instructions) INSTRUCTION MANUAL IMPORTANT: Read Before Using. Cordless Impact DriverDTD134 DTD146 012010

10 OPTIONAL ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use

11

12 www.makita.comMakita Jan-Baptist Vinkstraat 2, 3070, BelgiumMakita Corporation Anjo, Aichi, Japan 885243B229

2 ENGLISH (Original instructions) SPECIFICATIONS Model DTD134 DTD146 Machine screw 4 mm - 8 mm Standard bolt 5 mm - 14 mm Capacities High tensile b

3 • Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking a

4 15. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery

5 2. Do not disassemble battery cartridge. 3. If operating time has become excessively shorter, stop operating immediately. It may result in a risk

6 • When the tool is overloaded: At this time, release the switch trigger, remove the battery cartridge and remove causes of overload and then pull t

7 LED indicator status Remaining battery capacityAbout 50% or moreAbout 20% - 50%About less than 20% 012023 NOTE: • Before checking the remaining ba

8 Hook 12 012014 The hook is convenient for temporarily hanging the tool. This can be installed on either side of the tool. To install the hook, inse

9 4. The manner of holding the tool or the material of driving position to be fastened will affect the torque. 5. Operating the tool at low speed wi