Makita 4304T Instruction Manual download pdf (Page 4)

ADDITIONAL SAFETY RULES

Avoid cutting nails. Inspect for and remove all nails from the workpiece before

Don't cut hollow pipe.

Do not cut oversize workpiece.

Check for the proper clearance beneath the workpiece before cutting

that

Always wear eye protection conforming

with

current national standard.

Hold the tool firmly.

Make sure cord is out of your way and not

the line of cut.

Make sure the blade is not contacting the workpiece before the switch is

Keep hands away from moving parts.

operation.

the blade will not strike the floor, workbench, etc.

Severe eye injury could result.

turned on.

IO.

When cutting through walls, floors or wherever "live" electrical wires may

be encountered, DO NOT TOUCH ANY METAL PARTS

THE TOOL!

Hold the tool only by the insulated grasping surfaces to prevent electric shock

if you cut through a "live" wire.

11.

Do not leave the tool running. Operate the tool only when hand-held.

12.

Always switch off and wait for the blade to come to a complete stop before

13.

Do not touch the blade or the workpiece immediately after operation; they

removing the blade from the workpiece.

may be extremely hot and could burn your skin.

1 2 3 4 5 ... 20

No comments

Makita 4304T Instruction Manual Page 4